In recent years, with the rapid development of science and technology, we can contact more and more processing technology. I believe that the friends engaged in industrial production more or less have a certain understanding of the use of various mechanical equipment around us. Around us, there are many products produced through bakelite injection molding. Such products have very significant characteristics in the use performance, so today we will learn about the use of these bakelite injection molding What should I pay attention to.

There are quite a large number of plastic processing enterprises on the use of injection molding machine screw and barrel temperature. In the processing of plastic products, once the abnormal phenomenon occurs, the processing enterprises often think of the problem of the parameters of plastic raw materials, tools or equipment, and then adjust the processing parameters to eliminate accidents caused by the wear of the screw cylinder of the injection molding machine.

The screw barrel of bakelite injection molding is special, and the barrel does not need full heating. Generally, oil temperature machine is used to control the barrel temperature, which is more accurate. The barrel has isolation layer for heating oil circulation. Generally, the temperature is controlled between 55 and 95. If the temperature is too high, the bakelite powder will solidify. The mold needs to be heated. The bakelite powder is a heat curing plastic. Generally, the dynamic mold is 10-25 degrees higher than the fixed mold. The dynamic mold is set between 155 and 195. Some of the temperature may be higher.